Bring Your Beer Right to you with a Beer Keg Tap
We can always find beer kegs during parties or picnics with our family and friends. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. It is not as easy as you see people doing it.
In order to get beer from the keg, you need to control the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. It works by releasing the pressure, which in turn pushes the beer up and into a glass or a container. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.
You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. Remove the cap or seal since it will be harder to tap with it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. If you will do it, you need to play it safe.
With a portable keg system, you tap with CO2. Pressure is received by the keg in a single unit pump and tap combination, which is called party pump. IN this type, the keg and the beer keg tap are separated. You attach the pump, and the faucet must be opened so that the pressure in the keg is released. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. Traditional keg uses an on and off valve. This types works by gravity and there is no need for air pressure. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.
Another Source: read